D-Link DES-1228/ME - Page 175

DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
171
DES-1228/ME:5#enable ipif_ipv6_link_local_auto System
Command: enable ipif_ipv6_link_local_auto System
Success.
DES-1228/ME:5#
disable ipif_ipv6_link_local_auto
Purpose
Used to disable the auto configuration of a link local address when
no IPv6 address is configured.
Syntax
disable ipif_ipv6_link_local_auto [System]
Description
This command is used to disable the auto configuration of a link
local address when no IPv6 address is explicitly configured.
Parameters
None.
Restrictions
Only Administrator level, Operator level or Power User level users
can issue this command.
Example usage:
To disable the automatic configuration of link local address for an interface:
DES-1228/ME:5#disable ipif_ipv6_link_local_auto System
Command: disable ipif_ipv6_link_local_auto System
Success.
DES-1228/ME:5#
show ipif_ipv6_link_local_auto
Purpose
Used to display the link local address automatic configuration state.
Syntax
show ipif_ipv6_link_local_auto
Description
This command is used to display the link local address automatic
configuration state.
Parameters
None.
Restrictions
None.
Example usage:
To display interface information:
DES-1228/ME:5#show pif_ipv6_link_local_auto
Command: show pif_ipv6_link_local_auto
IPIF: System Automatic Link Local Address: Disabled
DES-1228/ME:5#