DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
173
config igmp_snooping
Purpose
Used to configure IGMP snooping on the Switch.
Syntax
config igmp_snooping [vlan_name <vlan_name 32> | vlanid <vidlist> | all] {state
[enable | disable] | fast_leave [enable | disable]} (1)
Description
This command is used to configure IGMP snooping on the Switch.
Parameters
<vlan_name 32> − The name of the VLAN for which IGMP snooping is to be
configured.
<vidlist> − Specifies a list of VLANs to be configured.
all – Specifies that all VLANs configured on the Switch will be configured.
fast_leave [enable | disable] − Enable or disable the IGMP snooping fast-leave
function. If enabled, the membership is immediately removed when the system
receives the IGMP leave message and the host that sends the leave message is
the last host for the group.
state [enable | disable] − Allows users to enable or disable IGMP snooping for the
specified VLAN.
Restrictions
Only Administrator level, Operator level or Power User level users can issue this
command.
Example usage:
To configure IGMP snooping:
DES-1228/ME:5#config igmp_snooping vlan_name default state enable
Command: config igmp_snooping vlan_name default state enable
Success.
DES-1228/ME:5#
To Next Page
Loading...
