D-Link DES-1228/ME - Page 195

DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
191
disable dhcp_relay
Purpose
Used to disable the DHCP/BOOTP relay function on the Switch.
Syntax
disable dhcp_relay
Description
This command is used to disable the DHCP/BOOTP relay function on
the Switch.
Parameters
None.
Restrictions
Only Administrator level, Operator level or Power User level users can
issue this command.
Example usage:
To disable DHCP relay:
DES-1228/ME:5#disable dhcp_relay
Command: disable dhcp_relay
Success.
DES-1228/ME:5#