DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
212
show 802.1x user
Purpose
Used to display the 802.1X user accounts on the Switch.
Syntax
show 802.1x user
Description
This command is used to display the 802.1X Port-based or Host-based
Network Access control local users currently configured on the Switch.
Parameters
None.
Restrictions
None.
Example usage:
To view 802.1X users currently configured on the Switch:
DES-1228/ME:5#show 802.1x user
Command: show 802.1x user
Index UserName
---- ------------
1 ctsnow
Total Entries: 1
DES-1228/ME:5#
delete 802.1x user
Purpose
Used to delete an 802.1X user account on the Switch.
Syntax
delete 802.1x user <username 15>
Description
This command is used to delete the 802.1X Port-based or Host-
based Network Access control local users currently configured on the
Switch.
Parameters
<username 15> − A username can be as many as 15 alphanumeric
characters.
Restrictions
Only Administrator level, Operator level or Power User level users
can issue this command.
Example usage:
To delete 802.1X users:
DES-1228/ME:5#delete 802.1x user ctsnow
Command: delete 802.1x user ctsnow
Success.
To Next Page
Loading...
