DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
258
config authen_login
radius − Adding this parameter will require the user to be authenticated
using the RADIUS protocol from a remote RADIUS server.
server_group <string 15> − Adding this parameter will require the user
to be authenticated using a user-defined server group previously
configured on the Switch.
local − Adding this parameter will require the user to be authenticated
using the local user account database on the Switch.
none – Adding this parameter will require no authentication to access
the Switch.
NOTE: Entering none or local as an authentication protocol
will override any other authentication that follows it on a
method list or on the default method list.
Restrictions
Only Administrator level users can issue this command.
Example usage:
To configure the user defined method list “Zira” with authentication methods TACACS, XTACACS and local, in that order.
DES-1228/ME:5#c
onfig authen_login method_list_name Zira method tacacs xtacacs
local
Command: config authen_login method_list_name Zira method tacacs xtacacs local
Success.
DES-1228/ME:5#
To configure the default method list with authentication methods XTACACS, TACACS+ and local, in that order:
DES-1228/ME:5#config authen_login default method xtacacs tacacs+ local
Command: config authen_login default method xtacacs tacacs+ local
Success.
DES-1228/ME:5#
delete authen_login method_list_name
Purpose
Used to delete a previously configured user defined method list of
authentication methods for users logging on to the Switch.
Syntax
delete authen_login method_list_name <string 15>
Description
This command is used to delete a list for authentication methods for
user login.
Parameters
<string 15> − Enter an alphanumeric string of up to 15 characters to
define the given method list to delete.
Restrictions
Only Administrator level users can issue this command.
To Next Page
Loading...
