DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
264
config authen application
Purpose
Used to configure various applications on the Switch for
authentication using a previously configured method list.
Syntax
config authen application [console | telnet | ssh | http | all] [login |
enable] [default | method_list_name <string 15>]
Description
This command is used to configure Switch configuration applications
(console, telnet, ssh, web) for login at the user level and at the
administration level (authen_enable) utilizing a previously configured
method list.
Parameters
application – Choose the application to configure. The user may
choose one of the following five options to configure.
console – Choose this parameter to configure the command line
interface login method.
telnet – Choose this parameter to configure the telnet login method.
ssh – Choose this parameter to configure the Secure Shell login
method.
http – Choose this parameter to configure the Web interface login
method.
all – Choose this parameter to configure all applications (console,
telnet, ssh, web) login method.
login – Use this parameter to configure an application for normal login
on the user level, using a previously configured method list.
enable − Use this parameter to configure an application for upgrading
a normal user level to administrator privileges, using a previously
configured method list.
default – Use this parameter to configure an application for user
authentication using the default method list.
method_list_name <string 15> − Use this parameter to configure an
application for user authentication using a previously configured
method list. Enter an alphanumeric string of up to 15 characters to
define a previously configured method list.
Restrictions
Only Administrator level users can issue this command.
Example usage:
To configure the default method list for the Web interface:
Command: config authen application http login default
Success.
DES-1228/ME:5#
show authen application
Purpose
Used to display authentication methods for the various applications
on the Switch.
Syntax
show authen application
Description
This command is used to display all of the authentication method lists
(login, enable administrator privileges) for Switch configuration
applications (console, telnet, SSH, Web) currently configured on the
Switch.
Parameters
None.
Restrictions
None.
To Next Page
Loading...
