D-Link DES-1228/ME - Page 332

DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
328
To display outbound LLDP advertisements for specific ports in brief mode:
DES-1228/ME:5# show lldp local_ports 1 mode brief
Command: show lldp local_ports 1 mode brief
Port ID : 1
---------------------------------------------------------
Port ID Subtype : Local
Port ID : 1/1
Port Description : RMON Port 1 on Unit 1
DES-1228/ME:5#
show lldp remote_ports
Purpose
Used to display the information learned from the neighbor.
Syntax
show lldp remote_ports {<portlist>} [brief | normal | detailed]
Description
This command is used to display the information learned from the
neighbor parameters.
A maximum of 32 VLAN Name entries and 10 Management Address
entries can be received.
Parameters
<portlist> - Specify a range of ports to be configured.
When a port list is not specified, information for all ports will be displayed.
brief - Display the information in brief mode.
normal - Display the information in normal mode. This is the default
display mode.
detailed - Display the information in detailed mode.
Restrictions
None.