DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
343
show address_binding
Purpose
Used to display IP-MAC-port binding entries.
Syntax
show address_binding {[ip_mac [all | ipaddress <ipaddr> mac_address
<macaddr>] | blocked [all | vlan_name <vlan_name> mac_address
<macaddr>] | ports]}
Description
This command is used to display IP-MAC-port binding entries. Three
different kinds of information can be viewed.
ip_mac – Address binding entries can be viewed by entering the
physical and IP addresses of the device.
blocked – Blocked address binding entries (bindings between VLAN
names and MAC addresses) can be viewed by entering the VLAN
name and the physical address of the device.
ports - The number of enabled ports on a device.
Parameters
ip_mac – The database the user creates for address binding.
all – For IP MAC binding all specifies all the IP-MAC-port binding
entries; for blocked address binding entries all specifies all the blocked
VLANs and their bound physical addresses.
blocked – The address database that the system auto learns and
blocks.
<ipaddr> – The IP address of the device where the IP-MAC-port
binding is made.
<macaddr> – The MAC address of the device where the IP-MAC-port
binding is made.
<vlan_name> – The VLAN name the blocked MAC belongs to.
Restrictions
None.
Example usage:
To display the global configuration of address binding on the Switch:
To Next Page
Loading...
