D-Link DES-1228/ME - Page 360

DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
356
show flow_meter
Purpose
Used to display the flow-based metering configuration.
Syntax
show flow_meter {profile_id <value 1-256> {access_id <access_id>}}
Description
This command displays the flow meter configuration.
Parameters
profile_id – Specifies the profile ID.
access_id – Specifies the access ID.
Restrictions
None.
Example usage:
To display the flow meter information:
DES-1228/ME:5# show flow_meter
Command: show flow_meter
Flow Meter information:
------------------------
Profile ID : 1 Access ID : 1 Mode : Single-rate Two-color
Rate: 2000(Kbps) Burst Size:1000(Kbyte)
Actions:
Conform : Permit
Violate : Drop
Profile ID : 1 Access ID : 2 Mode : Single-rate Two-color
Rate: 2000(Kbps) Burst Size:1016(Kbyte)
Actions:
Conform : Permit
Violate : Permit Replace_dscp : 20
Total Flow Meter Entries: 2
DES-1228/ME:5#