D-Link DES-1228/ME - Page 40

DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
36
show greeting_message
Purpose
Used to view the currently configured greeting message
configured on the Switch.
Syntax
show greeting_message
Description
This command is used to view the currently configured greeting
message on the Switch.
Parameters
None.
Restrictions
None.
Example usage:
To view the currently configured greeting message:
DES-1228/ME:5#show greeting_message
Command: show greeting_message
================================================================================
DES-1228/ME Metro Ethernet Switch
Command Line Interface
Firmware: Build 2.01.001
Copyright(C) 2012 D-Link Corporation. All rights reserved.
================================================================================