D-Link DES-1228/ME - Page 91

DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
87
config terminal line
Purpose
Used to configure the number of rows which can be displayed at a
screen.
Syntax
config terminal_line [default | <value 20-80>]
Description
This command is used to configure the number of rows which can be
displayed on a screen. The default value is 24.
Parameters
None.
Restrictions
Only Administrator level, Operator level or Power User level users
can issue this command.
Example usage:
To configure the terminal line:
DES-1228/ME:5# config terminal_line 30
Command: config terminal_line 30
Success.
DES-1228/ME:5#
show terminal line
Purpose
Used to display the number of rows which can be displayed at a
screen.
Syntax
show terminal_line
Description
This command is used to display the number of rows which can be
displayed on a screen.
Parameters
None.
Restrictions
None.
Example usage:
To show the terminal line:
DES-1228/ME:5# show terminal_line
Command: show terminal_line
Current terminal line number : 30
DES-1228/ME:5#