D-Link DES-1228/ME - Page 99

DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
95
disable syslog
Purpose
Used to disable the system log to be sent to a remote host.
Syntax
disable syslog
Description
This command is used to disable the system log to be sent to a
remote host.
Parameters
None.
Restrictions
Only Administrator level or Operator level users can issue this
command.
Example usage:
To disable the syslog function on the Switch:
DES-1228/ME:5#disable syslog
Command: disable syslog
Success.
DES-1228/ME:5#
show syslog
Purpose
Used to display the syslog protocol status as enabled or disabled.
Syntax
show syslog
Description
This command is used to display the syslog status as enabled or
disabled.
Parameters
None.
Restrictions
None.
Example usage:
To display the current status of the syslog function:
DES-1228/ME:5#show syslog
Command: show syslog
Syslog Global State : Disabled
DES-1228/ME:5#