DES-1228/ME Layer 2 Fast Ethernet Managed Switch
2
7. RFC2674 for 802.1p
8. IEEE 802.1X MIB
• IEEE 802.3x flow control in full duplex mode
• IEEE 802.1p Priority Queues
• IEEE 802.3u 100BASE-TX compliant
• RS-232 DCE console port for Switch management
• Provides parallel LED display for port status such as link/act, speed, etc.
• IEEE 802.3 10BASE-T compliant
• High performance switching engine performs forwarding and filtering at wire speed, maximum 14,881 packets/sec
on each 10Mbps Ethernet port, maximum 148,810 packet/sec on 100Mbps Fast Ethernet port and 1,488,100 for each
Gigabit port
• Full and half-duplex for both 10Mbps and 100Mbps connections. Full duplex allows the switch port to
simultaneously transmit and receive data. It only works with connections to full-duplex-capable end stations and
switches. Connections to a hub must take place at half-duplex
• Support Broadcast/Multicast storm control
• Non-blocking store and forward switching scheme capability to support rate adaptation and protocol conversion
• Supports by-port Egress/Ingress rate control
• Efficient self-learning and address recognition mechanism enables forwarding rate at wire speed
To Next Page
Loading...
