DES-1228/ME Layer 2 Fast Ethernet Managed Switch
134
VLAN Name
Allows the entry of a name for a previously configured VLAN.
Source MAC
Enter a MAC Address for the source MAC address.
Destination MAC
Enter a MAC Address mask for the destination MAC address.
802.1p (0-7) Enter a value from 0 to 7 to specify that the access profile will apply only to packets with this
802.1p priority value.
Ethernet Type
Specifies that the access profile will apply only to packets with this hexadecimal 802.1Q
Ethernet type value (hex 0x0-0xffff) in the packet header. The Ethernet type value may be
set in the form: hex 0x0-0xffff, which means the user may choose any combination of letters
and numbers ranging from a-f and from 0-9999.
Port Number
Enter the switch port number(s) to which you wish this rule to apply.
To view the settings of a previously correctly configured rule, click in the Access Rule Table to view the following window:
Figure 9-9. Access Rule Display window (Ethernet)
To Next Page
Loading...
