DES-1228/ME Layer 2 Fast Ethernet Managed Switch
144
Figure 10- 1. Traffic Control Settings window
Once the switch is in rest mode, the method of recovering this port is to manually recoup it using the Port Configuration window
in the Administration folder and selecting the disabled port and returning it to an Enabled status alternatively the user can wait
for the auto-recovery function which will occur after 5 minutes, the auto-recovery function cannot be configured by the user. To
utilize this method of Storm Control, choose the Shutdown option of the Action field in the window below. To view this window
to configure Traffic Control, click Security > Traffic Control.
To Next Page
Loading...
