DES-3000 Series Layer 2 Switch CLI Reference Manual
112
config 802.1p default_priority
Purpose Used to assign an 802.1p priority tag to an incoming untagged
packet that has no 802.1p priority tag.
Syntax
config 802.1p default_priority [<portlist> | all] <priority 0-7>
Description
The config 802.1p default_priority command allows specification
of the 802.1p priority value an untagged, incoming packet will be
assigned before being forwarded to its destination.
Parameters
<portlist> Specifies a port or range of ports to be configured.
all Specifies that the config 802.1p default_priority command
will be applied to all ports on the Switch.
<priority 0-7> Specifies the 802.1p priority value that an untagged,
incoming packet will be given before being forwarded to its
destination.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To configure 802.1p default priority on the Switch:
DES-3026:4#config 802.1p default_priority all 5
Command: config 802.1p default_priority all 5
Success.
DES-3026:4#
show 802.1p default_priority
Purpose Used to display the currently configured 802.1p priority value that will
be assigned to an incoming, untagged packet before being
forwarded to its destination.
Syntax
show
802.1p default_priority
{<portlist>}
Description
The show 802.1p default_priority command displays the currently
configured 802.1p priority value that will be assigned to an incoming,
untagged packet before being forwarded to its destination.
Parameters
<portlist> Specifies a port or range of ports to be viewed.
Restrictions None.
Example usage:
To display the current 802.1p default priority configuration on the Switch:
To Next Page
Loading...
