DES-3000 Series Layer 2 Switch CLI Reference Manual
210
config sim
candidate – Used to change the role of a commander switch to a candidate
switch.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To change the time interval of the discovery protocol:
DES-3026:4#config sim commander dp_interval 30
Command: config sim commander dp_interval 30
Success.
DES-3026:4#
To change the hold time of the discovery protocol:
DES-3026:4#config sim commander hold_time 120
Command: config sim commander hold_time 120
Success.
DES-3026:4#
To transfer the commander switch to be a candidate:
DES-3026:4#config sim candidate
Command: config sim candidate
Success.
DES-3026:4#
To transfer the Switch to be a commander:
DES-3026:4#config sim commander
Command: config sim commander
Success.
DES-3026:4#
To Next Page