DES-3000 Series Layer 2 Switch CLI Reference Manual
211
To update the name of a group:
DES-3026:4#config sim commander group_name Trinity
Command: config sim commander group_name Trinity
Success.
DES-3026:4#
download sim_ms
Purpose Used to download firmware or configuration file to an indicated
device.
Syntax
download sim_ms [firmware_from_tftp |
configuration_from_tftp] <ipaddr> <path_filename> {[members
<mslist 1-32> | all]}
Description This command will download a firmware file or configuration file to a
specified device from a TFTP server.
Parameters firmware_from_tftp – Specify this parameter to download firmware to
members of a SIM group.
configuration_from_tftp – Specify this parameter to download a switch
configuration to members of a SIM group.
<ipaddr> – Enter the IP address of the TFTP server.
<path_filename> – Enter the path and the filename of the firmware or
switch on the TFTP server.
members – Enter this parameter to specify the members to which to
download firmware or switch configuration files. The user may specify
a member or members by adding one of the following:
<mslist 1-32> – Enter a value, or values to specify which
members of the SIM group will receive the firmware or switch
configuration.
all – Add this parameter to specify all members of the SIM
group will receive the firmware or switch configuration.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To download firmware:
DES-3026:4#download sim_ms firmware 10.53.13.94
c:/des3000.had members all
Command: download sim_ms firmware 10.53.13.94 c:/des3000.had
members all
This device is updating firmware. Please wait...
Download Status :
ID MAC Address Result
--- ----------------- ----------------
To Next Page