DES-3000 Series Layer 2 Switch CLI Reference Manual
73
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r
Refresh
show utilization ports
Purpose Used to display real-time port utilization statistics.
Syntax
show
utilization ports {<portlist>}
Description This command will display the real-time port utilization statistics for
the Switch.
Parameters ports <portlist> – Entering this parameter along with a list of ports
will display the current utilization of selected ports on the Switch.
Restrictions None.
Example usage:
To display the port utilization statistics:
DES-3026:4#show utilization ports 1-26
Command: show utilization ports 1-26
Port TX/sec RX/sec Util Port TX/sec RX/sec Util
---- -------- ------ ---- ---- ------ ------ ----
1 0 0 0 22 0 0 0
2 0 0 0 23 0 0 0
3 0 0 0 24 0 0 0
4 0 0 0 25 0 0 0
5 0 0 0 26 0 0 0
6 0 0 0
7 0 0 0
8 0 0 0
9 0 0 0
10 0 0 0
11 0 0 0
12 0 0 0
13 0 0 0
14 0 0 0
15 0 0 0
16 0 0 0
17 0 0 0
18 0 0 0
19 0 0 0
20 0 0 0
21 0 0 0
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
To Next Page
Loading...
