DES-3000 Series Layer 2 Switch CLI Reference Manual
74
show utilization cpu
Purpose Used to display real-time CPU utilization statistics.
Syntax
show utilization cpu
Description This command will display the real-time CPU utilization statistics for
the Switch.
Parameters None.
Restrictions None.
Example usage:
To display the CPU utilization statistics:
DES-3026:4#show utilization cpu
Command: show utilization cpu
CPU utilization :
---------------------------------------------------------
Five seconds - 15% One minute - 25% Five minutes -
14%
DES-3026:4#
clear counters
Purpose Used to clear the Switch’s statistics counters.
Syntax
clear counters [ports <portlist>]
Description This command will clear the counters used by the Switch to compile
statistics.
Parameters
<portlist> Specifies a port or range of ports to be cleared for
statistics.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To clear the counters:
DES-3026:4#clear counters
Command: clear counters
Success.
DES-3026:4#
To Next Page
Loading...
