DES-3000 Series Layer 2 Switch CLI Reference Manual
12
DES-3026:4#
NOTICE: In case of lost passwords or password corruption, please refer to the
D-Link website and the White Paper entitled “Password Recovery Procedure”,
which will guide you through the steps necessary to resolve this issue.
config account
Purpose Used to configure user accounts.
Syntax
config account <username> {encrypt [plain_text | sha_1]
<password>}
Description The config account command configures a user account that has
been created using the create account command.
Parameters <username> Enter the username of the account.
<password> Enter a password for the account.
Restrictions Only Administrator-level users can issue this command.
Usernames can be between 1 and 15 characters.
Passwords can be between 0 and 15 characters.
Example usage:
To configure the user password of “dlink” account:
DES-3026:4#config account dlink
Command: config account dlink
Enter a old password:****
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success.
DES-3026:4#
show account
Purpose Used to display user accounts.
Syntax
show account
Description Displays all user accounts created on the Switch. Up to 8 user
accounts can exist on the Switch at one time.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To display the accounts that have been created:
To Next Page
Loading...
