D-Link DES-3010G - Page 61

DES-3000 Series Layer 2 Switch CLI Reference Manual
57
disable dhcp_relay
Purpose Used to disable the DHCP relay function on the switch.
Syntax
disable dhcp_relay
Description The disable dhcp_relay command disables the DHCP relay function
on the switch.
Parameters None
Restrictions Only Administrator and Operator-level users can issue this
command.
Example usage:
To disable the DHCP relay function:
DES-3026:4# disable dhcp_relay
Command: disable dhcp_relay
Success.
DES-3026:4#
show dhcp_relay
Purpose Used to display the current DHCP relay configuration.
Syntax
show dhcp_relay {ipif <ipif_name 12>}
Description The show dhcp_relay command displays the current DHCP relay
configuration.
Parameters <ipif_name 12> – IP interface name.
If no parameter specified, the system will be display all dhcp relay
configuration.
Restrictions None.