xStack DES-3526 / DES-3526DC Layer 2 Stackable Fast Ethernet Managed Switch User Manual
49
Priority (0-61440)
Select a value between 0 and 61440 to specify the priority for a specified MSTI for
forwarding packets. The lower the value, the higher the priority. This entry must be
divisible by 4094.
Click Apply to implement changes made.
To configure the parameters for a previously set MSTI, click on its hyperlinked MSTI ID number, which will reveal the following
window for configuration.
Figure 6- 27. Instance ID Settings window – modify
The user may configure the following parameters for a MSTI on the Switch.
Parameter Description
MSTI ID
Displays the MSTI ID previously set by the user.
Type
This field allows the user to choose a desired method for altering the MSTI settings. The
user has four choices.
• Add - Select this parameter to add VIDs to the MSTI ID, in conjunction with the VID
List parameter.
• Remove - Select this parameter to remove VIDs from the MSTI ID, in conjunction
with the VID List parameter.
• Delete - Select this parameter to delete this MSTI ID.
• Set Priority Only - Select this parameter to set the priority for the MSTI ID. This
field is used in conjunction with the Priority field.
VID List (1-4094)
This field is used to specify the VID range from configured VLANs set on the Switch that the
user wishes to add to this MSTI ID. Supported VIDs on the Switch range from ID number 1
to 4094. This parameter can only be utilized if the Type chosen is Add or Remove.
Priority (0-61440)
Select a value between 0 and 61440 to specify the priority for a specified MSTI for
forwarding packets. The lower the value, the higher the priority. This entry must be divisible
by 4094 and can only be utilized if the Type chosen is Set Priority Only.
Click Apply to implement changes made.
To Next Page
Loading...
