D-Link DGS-1008G - Installation; Before You Connect to the Network

ENGLISH
14
Installation
This section will explain how to connect Ethernet devices to your new D-Link switch and how to mount the switch.
Before You Connect to the Network
ThesitewhereyouinstalltheSwitchmaygreatlyaectitsperformance.PleasefollowtheseguidelinesforsettinguptheSwitch.
• InstalltheSwitchonasturdy,levelsurfacethatcansupportatleast3kg(6.6lbs.)of weight.Do notplaceheavyobjectsonthe
Switch.
• Thepoweroutletshouldbewithin1.82meters(6feet)oftheSwitch.
• VisuallyinspectthepowercordandseethatitisfullysecuredtotheACpowerport.
• MakesurethatthereisadequatespaceforproperheatdissipationfromandadequateventilationaroundtheSwitch.Leaveatleast
10 cm (4 inches) of space at the front and rear of the Switch for ventilation.
• InstalltheSwitchinafairlycoolanddryplacefortheacceptabletemperatureandhumidityoperatingranges.
• InstalltheSwitchinasitefreefromstrongelectromagneticeldgenerators(suchasmotors),vibration,dust,anddirectexposure
to sunlight.