D-Link DGS-1100-18 - Management and Security Features; User Accounts, SNMP, and HTTP;HTTPS

D-Link DGS-1100 Series Switch User Manual
6. Management
User Account Settings
SNMP
HTTP/HTTPS
D-Link Discovery Protocol
User Account Settings
This window is used to configure the user accounts. The active user account sessions can be
viewed.
There are several configuration options available in the Web User Interface (Web UI). The set of
configuration options available to the user depends on the account’s Privilege Level.
NOTE: By default, the admin account is created on the Switch.
To view the following window, click Management > User Account Settings, as shown below:
Figure 6-1 User Management Settings window
The fields that can be configured are described below:
Parameter Description
User Name
Select the user account name here.
Password
Enter the password for the account here.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified user account entry.
Note: Only one user can be logged into the switch at any time.
3
3
1
1