D-Link DGS-1100-18 - Port Rate Limiting

D-Link DGS-1100 Series Switch User Manual
Port Rate Limiting
This window is used to view and configure the port rate limiting settings.
To view the following window, click QoS > Port Rate Limiting, as shown below:
Figure 8-2 Port Rate Limiting window
The fields that can be configured are described below:
Parameter Description
From Port / To Port
Select the appropriate port range used for the configuration
here.
Direction
Select the direction option here. Options to choose from are
Input and Output. When Input is selected, the rate limit for
ingress packets is configured. When Output is selected, the
rate limit for egress packets is configured.
Rate Limit
Select the rate limit value here.
When Direction is Input, this drop-down menu allows you to
select data rate from 8Kbps to 512Mbps.
When Direction is Output, this drop-down menu allows you
to select data rate from 64Kbps to 512Mbps.
Click the Apply button to accept the changes made.
6
6
0
0