D-Link DGS-1100 MP/MPP Series Switch User Manual
35
8. NVR Information
The NVR Information section provides information on each NVR connected to the switch. It
features the port number, throughput, IP address and information relating to the cameras
connected to the NVR, such as the group name, total number of cameras and the port and IP
address of each camera. Hover-over each field to get more information about each value.
To view the following window, click on the NVR Information link in the navigation menu:
Figure 8-1 NVR Information Window
The total number of NVRs and the total throughput is listed at the top of the page. The icon
descriptions are as follows:
Icon Description
The total number of NVRs detected.
The total inbound throughput for all ports on the switch.
Hover-over each field to get more information about each value. A breakdown of each field is
below:
Icon Description
The port number of the port.
The device icon or photo. A generic photo is displayed for all NVR types.
The total inbound throughput for the port on the switch (measured in Mbps).
The IP address of the NVR.
The Description of the NVR. This can be edited by clicking the black pencil
icon next to the field (
) and then the green pencil icon when the
description has been entered ( ).
The Group Number that a device belongs to. All devices managed by an
NVR belong to the same Group Number. These are assigned sequentially,
To Next Page
Loading...
