D-Link DGS-1100-26MP - 11 Time; Clock Settings; SNTP Settings

D-Link DGS-1100 MP/MPP Series Switch User Manual
41
11. Time
Clock Settings
SNTP Settings
Clock Settings
This sub-menu is used to configure the time on the switch.
To view the following window, go to: Time > Clock Settings in the navigation menu:
Figure 11-1 Clock Settings Window
The fields that can be configured for the Clock Settings are described below:
Parameter Description
System Time
(HH:MM:SS)
Use this to set the system time in the format (HH:MM:SS).
Date (DD / MM / YYYY)
Use this to set the date, in the format (DD / MM / YYYY).
Click the Apply button to accept the changes made.
SNTP Settings
This sub-menu is used to configure an external time source on the switch. Simple Network Time
Protocol (SNTP) is a lightweight version of the NTP protocol and can be used to keep the system
clock in-sync by using a network-based time source.
To view the following window, go to: Time > SNTP Settings in the navigation menu:
Figure 11-2 SNTP Settings Window
The fields that can be configured for the SNTP Global Settings are described below:
Parameter Description
Current Time Source
Displays the current time source for the switch.