D-Link DGS-1100-26MP - Firmware Backup to HTTP

D-Link DGS-1100 MP/MPP Series Switch User Manual
49
Parameter Description
Source File
Enter the source filename and path of the firmware file
located on the local PC. Alternatively click the Browse
button to navigate to the location of the firmware file located
on the local PC.
Click the Upgrade button to initiate the firmware upgrade.
Firmware Backup to HTTP
This window is used to initiate a firmware backup to a local PC using HTTP.
To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to
HTTP, as shown below:
Figure 15-3 Firmware Backup to HTTP window
The fields that can be configured are described below:
Parameter Description
Source
Select the source image to use for the firmware backup.
Click the Backup button to initiate the firmware backup.