D-Link DGS-3024 - Page 30

DGS-3024 Layer 2 Switch CLI Reference Manual
create snmp user
the agent.
none – Adding this parameter will add no encryption.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create an SNMP user on the Switch:
DGS-3024:4#create snmp user dlink default encrypted
by_password auth md5 auth_password priv none
Command: create snmp user dlink default encrypted
by_password auth md5 auth_password priv none
Success.
DGS-3024:4#
delete snmp user
Purpose Used to remove an SNMP user from an SNMP group and also to
delete the associated SNMP group.
Syntax
delete snmp user <username 32>
Description
The delete snmp user command removes an SNMP user from its
SNMP group and then deletes the associated SNMP group.
Parameters
<username 32> − An alphanumeric string of up to 32 characters that
identifies the SNMP user that will be deleted.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete a previously entered SNMP user on the Switch:
DGS-3024:4#delete snmp user dlink
Command: delete snmp user dlink
Success.
DGS-3024:4#
28