DGS-3024 Layer 2 Switch CLI Reference Manual
create snmp community
read_write − Specifies that SNMP community members using the
community string created with this command can read from and write
to the contents of the MIBs on the Switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create the SNMP community string “dlink:”
DGS-3024:4#create snmp community dlink view ReadView read_write
Command: create snmp community dlink view ReadView read_write
Success.
DGS-3024:4#
delete snmp community
Purpose Used to remove a specific SNMP community string from the Switch.
Syntax
delete snmp community <community_string 32>
Description
The delete snmp community command is used to remove a
previously defined SNMP community string from the Switch.
Parameters
<community_string 32> − An alphanumeric string of up to 32
characters that is used to identify members of an SNMP community
to delete. This string is used like a password to give remote SNMP
managers access to MIB objects in the Switch’s SNMP agent.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete the SNMP community string “dlink:”
DGS-3024:4#delete snmp community dlink
Command: delete snmp community dlink
Success.
DGS-3024:4#
32
To Next Page
Loading...
