DGS-3024 Layer 2 Switch CLI Reference Manual
DGS-3024:4# config mirror source port 1 ingress_target port 2
egress_target port 3
Command: config mirror source port 1 ingress_target port 2 egress_target
port 3
Success.
DGS-3024:4#
enable mirror
Purpose Used to enable a previously entered port mirroring configuration.
Syntax
enable mirror
Description
This command, combined with the disable mirror command below, allows
you to enter a port mirroring configuration into the Switch, and then turn the
port mirroring on and off without having to modify the port mirroring
configuration.
Parameters None.
Restrictions None.
Example usage:
To enable mirroring configurations:
DGS-3024:4#enable mirror
Command: enable mirror
Success.
DGS-3024:4#
disable mirror
Purpose Used to disable a previously entered port mirroring configuration.
Syntax
disable mirror
Description
This command, combined with the enable mirror command above, allows
you to enter a port mirroring configuration into the Switch, and then turn the
port mirroring on and off without having to modify the port mirroring
configuration.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable mirroring configurations:
87
To Next Page
Loading...
