DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
107
To view the following window, click L2 Features > VLAN > GVRP > GVRP Advertise VLAN, as shown below:
Figure 5-14 GVRP Advertise VLAN Window
The fields that can be configured are described below:
Parameter Description
Unit Select the Switch unit that will be used for this configuration here.
From Port - To Port Select the range of ports that will be used for this configuration here.
Action Select the advertised VLAN to port mapping action here. Options to choose
from are All, Add, Remove, and Replace. When selecting All, all the
advertised VLANs will be used.
Advertise VID List Enter the advertised VLAN ID list here.
Click the Apply button to accept the changes made.
GVRP Forbidden VLAN
This window is used to display and configure the GVRP forbidden VLAN settings.
To view the following window, click L2 Features > VLAN > GVRP > GVRP Forbidden VLAN, as shown below:
Figure 5-15 GVRP Forbidden VLAN Window
To Next Page
Loading...
