DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
320
The fields that can be configured are described below:
Parameter Description
IP Address Enter the RADIUS server IPv4 address here.
IPv6 Address Enter the RADIUS server IPv6 address here.
Authentication Port Enter the authentication port number used here. This value must be between 0
and 65535. By default, this value is 1812. If no authentication is used, use the
value 0.
Accounting Port Enter the accounting port number used here. This value must be between 0
and 65535. By default, this value is 1813. If no accounting is used, use the
value 0.
Retransmit Enter the retransmit value used here. This value must be between 0 and 20. By
default, this value is 2. To disable this option, enter the value 0.
Timeout Enter the timeout value used here. This value must be between 1 and 255
seconds. By default, this value is 5 seconds.
Key Type
Select the key type that will be used here. Options to choose from are Plain
Text and Encrypted.
Key Enter the key, used to communicate with the RADIUS server, here. This key
can be up to 32 characters long.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
RADIUS Group Server Settings
This window is used to display and configure the RADIUS group server settings.
To view the following window, click Security > RADIUS > RADIUS Group Server Settings, as shown below:
Figure 9-31 RADIUS Group Server Settings Window
The fields that can be configured are described below:
Parameter Description
Group Server Name Enter the RADIUS group server name here. This name can be up to 32
characters long.
IP Address Enter the group server IPv4 address here.
IPv6 Address Enter the group server IPv6 address here.
Click the Add button to add a new entry based on the information entered.
Click the Show Detail button to view and configure more detailed settings for the RADIUS group server.
Click the Delete button to remove the specified entry.
To Next Page
Loading...
