Name: D-Link DI-524
Brand: D-Link
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Frequently Asked Questions (continued)

What are virtual servers?

A Virtual Server is defined as a service port, and all requests to this port will be

redirected to the computer specified by the server IP. For example, if you have an FTP

Server (port 21) at 192.168.0.5, a Web server (port 80) at 192.168.0.6, and a VPN

server at 192.168.0.7, then you need to specify the following virtual server mapping

table:

Server Port

Server IP

Enable

21 192.168.0.5 X

80 192.168.0.6 X

1723 192.168.0.7 X

How do I use PC Anywhere with my DI-524 router?

You will need to open 3 ports in the Virtual Server section of your D-Link router.

Step 1 Open your web browser and enter the IP Address of the router (192.168.0.1).

Step 2 Click on Advanced at the top and then click Virtual Server on the left side.

Step 3 Enter the

information as seen

below. The Private IP

is the IP Address of the

computer on your local

network that you want to

connect to.

Step 4 The first entry

will read as shown here:

Step 5 Click Apply

and then click Continue.

Other manuals for D-Link DI-524

Questions and Answers:

Need help?

Do you have a question about the D-Link DI-524 and is the answer not in the manual?

General