D-Link DI-524 - Page 16

16
Using the Conguration Menu (continued)
Home > WAN > PPPoE
IP Address-
This option is only available for Static PPPoE. Enter the static
IP Address for the PPPoE connection.
(Continued on the next page)
User Name-
Your PPPoE username provided by your ISP.
Service Name-
Enter the Service Name provided by your ISP (optional).
Retype Password-
Re-enter the PPPoE password
PPPoE-
Static PPPoE-you have an assigned (static) IP Address.
Choose this option if your ISP uses PPPoE. (Most DSL users
will select this option.)
Dynamic PPPoE- receive an IP Address automatically from your ISP.
Primary DNS
Address-
Primary DNS IP address provided by our ISP
Secondary DNS
Address-
This option is only available for Static PPPoE. Enter the static
IP Address for the PPPoE connection.
Choose PPPoE (Point
to Point Protocol over
E t h e r n e t ) i f y o u r
ISP uses a PPPoE
c o n n e c t i o n . Yo u r
ISP will provide you
with a username and
password. This option
is typically used for
DSL services. Select
Dynamic PPPoE to
obtain an IP address
automatically for your
PPPoE connection.
Select Static PPPoE to
use a static IP address
f o r yo u r P P P o e E
connection.
Please be sure
to remove any
existing PPPoE client
software installed on
your computers.