D-Link DI-524 - Restore to Factory

33
Using the Conguration Menu (continued)
Tools > System
The current system settings can be saved as a le onto the local hard drive. The saved
le or any other saved setting le can be loaded back on the Broadband Router. To
reload a system settings le, click on Browse to browse the local hard drive and locate
the system le to be used. You may also reset the Broadband Router back to factory
settings by clicking on Restore.
Click Save to save the current settings to the local Hard Drive
Click Browse to nd the settings, then click Load
Save Settings to
Local Hard Drive-
Load Settings from
Local Hard Drive-
Restore to Factory
Default Settings-
Click Restore to restore the factory default settings