D-Link DI-524 - Assigning a Static Ip Address in Windows Xp

51
Input your IP address and
subnet mask. (The IP
Addresses on your network
must be within the same
range. For example, if
one computer has an IP
Address of 192.168.0.2,
the other computers should
have IP Addresses that are
sequential, like 192.168.0.3
and 192.168.0.4. The subnet
mask must be the same for
all the computers on the
network.)
Networking Basics
Assigning a Static IP Address
in Windows XP/2000
Input your DNS server
addresses. (Note: If you
are entering a DNS server,
you must enter the IP
Address of the Default
Gateway.)

The DNS server information will be supplied
by your ISP (Internet Service Provider.)

Click OK
 Click on Internet Protocol
(TCP/IP)
 Click Properties



