D-Link DI-524 - Page 81

81
Frequently Asked Questions (continued)
What are virtual servers?
A Virtual Server is dened as a service port, and all requests to this port will be
redirected to the computer specied by the server IP. For example, if you have an
FTP Server (port 21) at 192.168.0.5, a Web server (port 80) at 192.168.0.6, and
a VPN server at 192.168.0.7, then you need to specify the following virtual server
mapping table:
Server Port
Server IP
Enable
21
192.168.0.5 X
80
192.168.0.6 X
1723
192.168.0.7 X
How do I use PC Anywhere with my DI-524 router?
You will need to open 3 ports in the Virtual Server section of your D-Link router.
Step 1 Open your web browser and enter the IP Address of the router
(192.168.0.1).
Step 2 Click on Advanced at the top and then click Virtual Server on the left side.
Step 3 Enter the
information as seen
below. The Private IP
is the IP Address of the
computer on your local
network that you want
to connect to.
Step 4 The rst entry
will read as shown here:
Step 5 Click Apply
and then click Continue.