89
Frequently Asked Questions (continued)
Step 3 Create a new rewall rule:
Leave the second box empty. Under Protocol, select UDP. In the port range boxes,
enter 5060 in the rst box and leave the second box empty.
Click Always or set a schedule.
Step 4 Click Apply and
then Continue.
Step 5
Repeat steps 3 and 4
enter ichat2 and open
ports 16384-16403 (UDP).
How do I set up my router to use iChat? -for Macintosh users-
(continued)
Click Enabled.
Enter a name (ichat1).
Click Allow.
Next to Source, select
WAN under interface.
In the rst box, enter an *.
Leave the second box
empty.
Next to Destination, select
LAN under interface.
Enter the IP Address of the
computer you are running
iChat from.
To Next Page
Loading...
