Need help?Do you have a question about the D-Link DIR-3040 and is the answer not in the manual?
General| Brand | D-Link |
|---|---|
| Model | DIR-3040 |
| Category | Network Router |
| Language | English |
Lists the items included in the router package.
Details the network hardware and client requirements for the router.
Lists browser and OS requirements for accessing the router's interface.
Specifies requirements for using the mobile app for setup.
Explains the router's performance benefits from its processor.
Describes the Wi-Fi Mesh capability for expanding network coverage.
Details the QoS engine for prioritizing network traffic.
Explains automatic firmware update functionality for security and features.
Highlights ease of setup via the D-Link Wi-Fi app or web setup wizard.
Describes the function of each LED on the router for status indication.
Details the function of each port on the router's back panel.
Explains the function of the WPS button on the front of the router.
Provides essential pre-installation considerations and requirements.
Offers tips for maximizing wireless signal range and performance.
Outlines the different ways to configure the router (App, Wizard, Manual).
Instructions on finding, installing, and opening the D-Link Wi-Fi app.
Steps to start the device setup process within the app.
Guides user to scan QR code or manually proceed to device selection.
Instructions on selecting the router model and proceeding with setup.
Guides on positioning the router and antennas for optimal coverage.
Steps for connecting the router to the modem.
Instructions for connecting power and waiting for router initialization.
Guides on connecting to the router wirelessly or via Ethernet.
How to check if the Internet connection is working after setup.
How to launch the setup wizard via web browser.
User must agree to terms and privacy policy to proceed.
General guidance to follow the wizard's steps for configuration.
Guide to selecting the correct connection type (DHCP, PPPoE, Static).
Steps to set up the Wi-Fi network name and password.
Guide to creating a password for router administration.
Instructions for setting the router's time zone.
Summarizes configured settings and finalizes the setup process.
Process of saving new settings and confirming successful configuration.
How to log in to the router's web interface.
Overview of the main interface elements and navigation.
Explains the Home page's interactive diagram for status monitoring.
How to check IPv4 and IPv6 connection details.
Options to disconnect and reconnect the Internet connection.
Accessing and viewing the router's Wi-Fi name, password, and IP addresses.
How to reconfigure network and wireless settings.
Displays currently connected clients and their IP addresses.
How to edit individual client settings via a pencil icon.
Fields for naming, reserving IP, and setting parental controls for clients.
Accessing extender details and editing their settings.
Options to reboot or remove an extender from the network.
Link to information about Mesh Network configuration.
Explains D-Link's Wi-Fi Mesh for expanding network coverage.
Accessing information about connected USB storage devices.
Steps to reconfigure USB sharing via UPnP, SAMBA, or FTP.
How to open the setup wizard from the Settings menu.
Guide to choosing the Internet connection type (DHCP, PPPoE, Static).
Configuration for obtaining IP address automatically from ISP.
Options for Host Name, DNS Servers, MTU, and MAC Address Clone.
How to manually configure IP address, subnet mask, and gateway.
Options for secondary DNS, MTU, and MAC Address Clone.
Configuration for PPPoE connection using ISP credentials.
Settings for connection mode and idle time.
Options for Address Mode.
Configuration for PPTP connection using server address and credentials.
Options for Address Mode.
Configuration for L2TP connection using server address and credentials.
Options for Address Mode.
Settings for DS-Lite IPv6 connection type.
Guide to choosing IPv6 connection types (Auto Detection, Static, SLAAC/DHCPv6).
Configuration for automatic detection of IPv6 connection method.
Configuring DNS servers and LAN IPv6 addresses.
How to manually configure IPv6 address, prefix length, and gateway.
Setting up the router's local IPv6 address.
Setting up IPv6 address using SLAAC or DHCPv6.
Configuration for IPv6 PPPoE connection.
Configuration for IPv6 6rd connection.
Setting up IPv6 for local network access without Internet.
Setting up VLAN for services like Triple-Play.
Assigning traffic types to LAN ports.
Enabling or disabling the Wi-Fi Mesh feature.
Enabling/disabling Smart Connect for simplified Wi-Fi configuration.
Steps to set up the Wi-Fi network name and password.
Advanced options for security mode, transmission power, and schedule.
Settings for individual 2.4GHz and 5GHz bands when Smart Connect is off.
Detailed settings for security, 802.11 modes, channel, width, and coexistence.
Enabling or disabling the WPS Push Button Configuration functionality.
Explanation of the Guest Zone feature for temporary guest access.
Setting up guest zone when Smart Connect is enabled.
Setting up guest zones for specific bands when Smart Connect is disabled.
Limiting guest access to only the Internet.
Changing local IP address, subnet mask, and domain name.
Configuring DHCP server status, IP range, and lease time.
Options for WAN port speed and UPnP.
Configuring USB drive access via local network or FTP.
Enabling UPnP media server and Windows file sharing.
Enabling and configuring the FTP server and remote sharing.
Viewing registration status and account information for D-Link Cloud Service.
Launching the speedtest to check Internet connection speed.
Selecting management types for QoS rules.
Setting download/upload speeds for QoS.
How to assign priority levels to connected clients.
Options to enable/disable DMZ and Stateful Packet Inspection (SPI).
Enabling anti-spoofing checks and IPv6 security features.
Settings for PPTP, IPSec, RTSP, and SIP ALGs.
How to create, edit, or remove firewall rules (ALLOW/DENY).
Fields for rule name, source/destination IP, protocol, and schedule.
How to set up port forwarding for specific devices.
Fields for rule name, local IP, TCP/UDP ports, and schedule.
Setting up virtual server for port redirection to internal LAN IP.
Fields for rule name, local IP, protocol, external/internal ports, and schedule.
Restricting access to specific URLs or blocking keywords.
Configuring custom routes for IPv4 data traffic.
Fields for route name, destination network, mask, gateway, metric, and interface.
Configuring custom routes for IPv6 data traffic.
Fields for route name, destination network, prefix length, gateway, metric, and interface.
Associating a domain name with a changing IP address.
Configuring host names and IPv6 addresses for dynamic DNS.
Setup for the router's Quick VPN server functionality.
Creating and managing user accounts for router services.
Selecting authentication protocols like MSCHAPv2, PAP, CHAP.
Setting the router's time zone and configuring NTP server.
Defining schedules to control router functions.
Configuring router logs and sending them to a Syslog server.
Configuring email notifications for log events.
Changing the administrator password for the router.
Enabling remote management and controlling LED status lights.
Saving, loading, and restoring router configurations.
Setting up automatic router reboots.
Setting up user accounts with specific service permissions.
Configuring permissions for SAMBA, FTP, and VPN access.
Options for automatic or manual router firmware upgrades.
Monitoring packet counts for Internet, LAN, and Wi-Fi networks.
Monitoring packet counts for connected extenders.
Overview of controlling the router via voice assistants.
Initial step to launch the D-Link Wi-Fi app.
Accessing the settings menu within the D-Link Wi-Fi app.
Navigating to the Cloud Service section in the app.
Initiating the account registration process.
Options to create a new D-Link account or log in to an existing one.
Opening the Amazon Alexa application.
Navigating to the menu within the Alexa app.
Accessing the Skills & Games section in the Alexa app.
Searching for the D-Link Wi-Fi skill in the Alexa app.
Enabling the D-Link Wi-Fi skill to link it with Alexa.
Logging into the D-Link account to link the skill.
Confirmation of linking and reference to voice commands.
List of voice commands to control router features via Alexa.
Opening the Google Assistant application.
Starting the connection to D-Link Wi-Fi via Google Assistant.
Confirming the link between Google Assistant and D-Link Wi-Fi.
Logging into the D-Link account for integration.
Granting permissions and confirming successful linkage.
List of voice commands to control router features via Google Assistant.
Explains D-Link's Wi-Fi Mesh for expanding network coverage.
Connecting the Wi-Fi Mesh compatible device near the router.
Using an Ethernet cable to connect the mesh device to the router's LAN port.
Disconnecting the cable and placing the device to extend Wi-Fi.
Explains how Quick VPN enhances security for remote access.
Notes on security, performance impact, and concurrent sessions.
Step-by-step instructions for setting up Quick VPN on iOS.
Fields for VPN type, server, account, password, and secret.
How to connect to and disconnect from the Quick VPN server on iOS.
Step-by-step instructions for setting up Quick VPN on Mac OS X.
Entering the passkey in the Shared Secret field for authentication.
How to connect to and disconnect from the Quick VPN server on Mac.
Step-by-step instructions for setting up Quick VPN on Windows 7.
Entering user name, password, and advanced settings.
How to connect to and disconnect from the Quick VPN server on Windows 7.
Step-by-step instructions for setting up Quick VPN on Windows 8.1/8.
Selecting L2TP/IPSec and entering passkey.
How to connect to and disconnect from the Quick VPN server on Windows 8.1/8.
Step-by-step instructions for setting up Quick VPN on Windows 10.
Selecting L2TP/IPSec and entering connection details.
How to connect to and disconnect from the Quick VPN server on Windows 10.
Using the WPS button to connect wireless devices to the router.
Steps to find and connect to a wireless network on Windows 10.
Steps to find and connect to a wireless network on Windows 8.
Entering the network security key or using WPS.
How the connection status is displayed after successful connection.
Steps to find and connect to a wireless network on Windows 7.
Entering the security key or using the WPS button for connection.
Verifying the connection status after attempting to connect.
Solutions for not being able to access the router's web interface.
Steps to configure Internet settings if access fails.
Procedure to reset the router if the password is forgotten.
Explains how wireless technology works and its benefits.
Differentiates between Wireless Local Area Networks and Personal Area Networks.
Discusses the widespread adoption and use of wireless technology.
Benefits and applications of wireless in home and office environments.
How wireless is used in public places and for remote access.
Tips for optimizing router placement, eliminating interference, and security.
Explains the two main modes of wireless networking.
Steps to verify the IP address, subnet mask, and gateway using ipconfig.
Guide to manually assigning a static IP address and DNS settings.
Explains WPA/WPA2 standards and their improvements over WEP.
Details on using a passphrase or key for wireless authentication.
Lists device interfaces, antenna types, and wireless standards.
Specifications for power input/output, operating temperature, and humidity.
Information on certifications, physical dimensions, and product weight.
Compliance statement for Canadian ISED regulations.
Information on compliance with ISED radiation exposure limits.
To Next Page
