D-Link DIR-456U - Page 48

44D-Link DIR-456U User Manual
Section 3 - Configuration
STEP 1: SELECT CONFIGURATION METHOD
You may select Auto if your device supports WPS. You may select Manual
if you would like to view the current wireless setting for conguring your
device manually.
STEP 2: CONNECT YOUR WIRELESS DEVICE
If Auto conguration is chose, you will be given the option to add a wireless
device using a PIN, or using the Push Button Conguration (PBC).
PIN: Enter the PIN from your wireless device and click the Connect button
on your screen within 120 seconds.
PBC: Press the WPS button on your wireless device and click the Connect
button on your screen within 120 seconds.
If Manual Conguration is chosen, you will see a screen like the one shown
on the right.
Click Next to save your changes, or click Cancel to discard your changes.