49D-Link DIR-456U User Manual
Section 3 - Configuration
Time
Select the appropriate Time Zone
from the drop-down box.
Select this checkbox to enter a start
date and an end date for daylight
saving time.
The Network Time Protocol (NTP)
synchronizes the computer’s clock
over a network.
Manually enter the values for Year,
Month, Day, Hour, Minute, and
Second.
This section will help you set the time zone that you are in and the NTP (Network Time Protocol) Server. Daylight Saving can also be
congured to adjust the time when needed.
Click Save Settings to save your changes, or click Don’t Save Settings to discard your changes.
Time Zone:
Enable Daylight Saving:
Automatic Time and Date
Configuration:
Set the Time and Date
Manually:
To Next Page
Loading...
