D-Link dir-600m - Page 26

22D-Link DIR-600M User Manual
Section 3 - Conguration
If you choose Static IP, please congure the following elds;
Enter the IP address of the router.
Enter the subnet mask.
Enter the default gateway.
Enter the MTU size.
Enter up to three DNS Server IP addresses.
IP Address:
Subnet Mask:
Default
Gateway:
MTU Size:
DNS Server 1,
2, 3:
When you have nished conguring the WAN settings, click the Apply Changes button.
If you choose PPPoE, please congure the following elds:
Enter a user name.
Enter a password.
Enter the PPPoE Server name. This is optional.
Enter the MTU size.
Select the Connection Type.
Click this if the DNS is to be obtained automatically.
Click this to specify a DNS Server. You can enter up to three DNS servers.
User Name:
Password:
Service Name:
MTU Size:
Connection
Type:
Attain DNS
Automatically:
Set DNS
Manually:
When you have nished conguring the WAN settings, click the Apply Changes button.