D-Link dir-600m - Advanced Wireless

26D-Link DIR-600M User Manual
Section 3 - Conguration
Enable wireless on your network.
The fragmentation threshold, which is specied in bytes,
determines whether packets will be fragmented. Packets
exceeding the 2346 byte setting will be fragmented
before transmission. 2346 is the default setting.
This value should remain at its default setting of 2346.
If inconsistent data flow is a problem, only a minor
modication should be made.
Set the transmit power of the antennas in pecentage.
Use the dropdown menu to specify whether the Router
should use the Short Preamble or Long Preamble type.
The preamble type denes the length of the CRC (Cyclic
Redundancy Check)
block for communication between the Router and
roaming wireless adapters.
Use the radio buttons to enable or disable HT20/40
Coexistence.
Enable Wireless:
Fragment
Threshold (256-
2346):
RTS Threshold (1-
2347):
Preamble Type:
Radio Power:
HT20/40
Coexistence:
Advanced Wireless
Click the Apply Changes button to save any changes made.