DIR-620S Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Overview
Back and Bottom Panels
Figure 2. Back panel view.
Port Description
ON/OFF
A button to turn the router on/off.
12VDC IN
Power connector.
WPS
A button to set up wireless connection (the WPS function) and
enable/disable wireless network.
To use the WPS function: with the device turned on, press the button
and release. The WPS LED should start blinking.
To disable the router's wireless network: with the device turned on,
push the button, hold it for 10 seconds, and release. The WLAN LED
should turn off.
USB
A port for connecting a USB device (modem, storage, printer).
LAN 1-4
4 Ethernet ports to connect computers or network devices.
Page 15 of 236
To Next Page
Loading...
