DIR-620S Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring via Web-based Interface
IPsec
On the Advanced / IPsec page, you can configure VPN tunnels based on IPsec protocol.
IPsec is a protocol suite for securing IP communications.
Figure 152. The Advanced / IPsec page.
To allow IPsec tunnels, move the Enable switch to the right. Upon that the Tunnels and Status
sections are displayed on the page.
If you want to log all data on IPsec tunnel debugging, move the Debug switch to the right.
In the Status section, the current state of an existing tunnel is displayed.
Page 188 of 236
To Next Page
Loading...
