DIR-620S Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring via Web-based Interface
XUPNPD
On the USB Storage / XUPNPD page, you can enable the XUPNPD plug-in. It allows to
broadcast media content received from the Internet sources or IPTV service to DLNA-certified
devices of your LAN.
Figure 126. The USB Storage / XUPNPD page.
To use the XUPNPD plug-in, connect a USB storage to the router and move the Enable switch to
the right.
!
To let IPTV services operate using the XUPNPD plug-in, enable the UDPXY application.
In the Service field, the address of the web-based interface of the XUPNPD plug-in is displayed.
To access the page of the XUPNPD plug-in and configure all needed settings, click the link.
Figure 127. The XUPNPD plug-in page.
Page 160 of 236
To Next Page
Loading...
