DIR-815 AC1200 Wave 2 MU-MIMO Wi-Fi
Router with 3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
In the Dynamic IP Addresses section, you can configure IPv6 addresses assignment settings.
Figure 95. Configuring the local interface. The IPv6 tab. The Dynamic IP Addresses section.
Parameter Description
Dynamic IPv6 Addresses
Mode of IPv6 address
assignment
Select the needed value from the drop-down list.
• Disable: Clients' IPv6 addresses are assigned manually.
• Stateless: Clients themselves configure IPv6 addresses
using the prefix.
• Stateful: The built-in DHCPv6 server of the router allocates
addresses from the range specified in the Start IP and End
IP fields. Also when this value is selected, the Static IP
Addresses section is displayed on the tab.
Start IP / End IP
The start and the end values for the latest hextet (16 bit) of the range
of IPv6 addresses which the DHCPv6 server distributes to clients.
SELECT ADDRESS
RANGE
Use the button to set one of the available IPv6 address ranges. In the
window displayed, select the needed range and click the SELECT
button to automatically fill in the Start IP and End IP fields.
Lease time The lifetime of IPv6 addresses provided to clients.
Page 118 of 240
To Next Page
Loading...
