DIR-815 AC1200 Wave 2 MU-MIMO Wi-Fi
Router with 3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
VLAN
On the Advanced / VLAN page, you can edit existing and create new virtual networks (VLAN),
e.g., for distinguishing traffic or specifying additional WAN interfaces .
By default, 2 VLANs are created in the router's system:
• lan: for the LAN interface, it includes LAN ports and Wi-Fi networks. You cannot delete
this VLAN.
• wan: or the WAN interface; it includes the WAN port. You can edit or delete this VLAN.
Figure 134. The Advanced / VLAN page.
If you want to create a VLAN including LAN ports or available Wi-Fi networks of the router, first
delete relevant records from the lan network on this page. To do this, select the lan line. On the
opened page, in the Untagged Ports section, deselect the checkbox located to the left of the
relevant element, and click the APPLY button.
To create a new VLAN, click the ADD button ( ).
Figure 135. The page for adding a VLAN.
Page 174 of 240
To Next Page
Loading...
